500×200×12 mm S235JRH Steel Rectangular Hollow Section
500x200x12mm Steel rectangular hollow section in S235JRH, S275J0H, S355J2H to EN 10219, with a primer-coated surface optimised for paint adhesion. Nominal weight 122.507 kg/m.
Minimum order
Minimum 10 t per size. If the size is already in the current production cycle, we can accept orders from 5 t. Standard length 6 m; 4–12 m on request. We confirm the minimum, lead time and grade in your quote.
Add to Quote Request
Select length and quantity to add to your quote cart
Minimum order: 10 t per size (from 5 t if the size is in production)
Applications & Usage
This extra heavy-duty industrial Steel rectangular hollow section is commonly specified for heavy structural supports, load-bearing frames, and demanding industrial applications. The 12mm wall thickness provides exceptional structural integrity while maintaining workability. The applied finish enhances both durability and appearance. Available in standard lengths of 6m, this profile can be easily cut, drilled, and welded to suit your specific requirements.
Technical Specifications
| Specification | Value |
|---|---|
| Dimensions | 500mm × 200mm × 12mm |
| Weight per Meter | 122.507 kg/m |
| Material | Steel |
| Alloy/Grade | S235JRH, S275J0H, S355J2H |
| Standard | EN 10219 |
| Finish | Primer Coated |
| Standard Length | 6m |
| Minimum Order per Size | 10 t |
| Cut-to-Length Range | 4000 – 12000 mm |
Section Properties
Nominal values calculated from nominal dimensions to EN 10219-2.
| Property | Value |
|---|---|
| Cross-sectional area(A) | 156 cm² |
| Second moment of area(Ix) | 46312 cm⁴ |
| Second moment of area(Iy) | 11101 cm⁴ |
| Radius of gyration(ix) | 17.2 cm |
| Radius of gyration(iy) | 8.43 cm |
| Elastic section modulus(Wel,x) | 1852 cm³ |
| Elastic section modulus(Wel,y) | 1110 cm³ |
| Plastic section modulus(Wpl,x) | 2377 cm³ |
| Plastic section modulus(Wpl,y) | 1252 cm³ |
| Torsional inertia constant(It) | 30620 cm⁴ |
| Torsional modulus constant(Ct) | 2016 cm³ |
| Surface area per metre(As) | 1.34 m²/m |
| Length per tonne | 8.16 m |
Grade strength and capacity
Minimum strength of each grade this size is rolled in, with the indicative capacity of the section.
| Grade | Min. yield | Tensile | Bending Wel·fy | Axial A·fy |
|---|---|---|---|---|
| S235JRH | 235 MPa | 360–510 MPa | 435 kNm | 3667 kN |
| S275J0H | 275 MPa | 410–560 MPa | 509 kNm | 4292 kN |
| S355J2H | 355 MPa | 470–630 MPa | 658 kNm | 5540 kN |
Ordered in S355J2H, the S235JRH bending capacity of this size is reached with a 8 mm wall in the same outer size (84.2 kg/m, 31% lighter).
Indicative values from nominal dimensions: Wel × fy and A × fy, without buckling, cross-section class or partial safety factors. Not a design check.
This size is also rolled in high-strength steel: S420MC–S700MC version →
Similar Sizes
Explore alternative dimensions that might suit your needs