400×300×16 mm S235JRH Steel Rectangular Hollow Section
400x300x16mm Steel rectangular hollow section in S235JRH, S275J0H, S355J2H to EN 10219, with a primer-coated surface optimised for paint adhesion. Nominal weight 159.176 kg/m.
Minimum order
Minimum 10 t per size. If the size is already in the current production cycle, we can accept orders from 5 t. Standard length 6 m; 4–12 m on request. We confirm the minimum, lead time and grade in your quote.
Add to Quote Request
Select length and quantity to add to your quote cart
Minimum order: 10 t per size (from 5 t if the size is in production)
Applications & Usage
This extra heavy-duty industrial Steel rectangular hollow section is commonly specified for heavy structural supports, load-bearing frames, and demanding industrial applications. The 16mm wall thickness provides exceptional structural integrity while maintaining workability. The applied finish enhances both durability and appearance. Available in standard lengths of 6m, this profile can be easily cut, drilled, and welded to suit your specific requirements.
Technical Specifications
| Specification | Value |
|---|---|
| Dimensions | 400mm × 300mm × 16mm |
| Weight per Meter | 159.176 kg/m |
| Material | Steel |
| Alloy/Grade | S235JRH, S275J0H, S355J2H |
| Standard | EN 10219 |
| Finish | Primer Coated |
| Standard Length | 6m |
| Minimum Order per Size | 10 t |
| Cut-to-Length Range | 4000 – 12000 mm |
Section Properties
Nominal values calculated from nominal dimensions to EN 10219-2.
| Property | Value |
|---|---|
| Cross-sectional area(A) | 203 cm² |
| Second moment of area(Ix) | 44350 cm⁴ |
| Second moment of area(Iy) | 28535 cm⁴ |
| Radius of gyration(ix) | 14.8 cm |
| Radius of gyration(iy) | 11.9 cm |
| Elastic section modulus(Wel,x) | 2218 cm³ |
| Elastic section modulus(Wel,y) | 1902 cm³ |
| Plastic section modulus(Wpl,x) | 2708 cm³ |
| Plastic section modulus(Wpl,y) | 2228 cm³ |
| Torsional inertia constant(It) | 58730 cm⁴ |
| Torsional modulus constant(Ct) | 3159 cm³ |
| Surface area per metre(As) | 1.32 m²/m |
| Length per tonne | 6.28 m |
Grade strength and capacity
Minimum strength of each grade this size is rolled in, with the indicative capacity of the section.
| Grade | Min. yield | Tensile | Bending Wel·fy | Axial A·fy |
|---|---|---|---|---|
| S235JRH | 235 MPa | 360–510 MPa | 521 kNm | 4765 kN |
| S275J0H | 275 MPa | 410–560 MPa | 610 kNm | 5576 kN |
| S355J2H | 355 MPa | 470–630 MPa | 787 kNm | 7198 kN |
Ordered in S355J2H, the S235JRH bending capacity of this size is reached with a 10 mm wall in the same outer size (104 kg/m, 35% lighter).
Indicative values from nominal dimensions: Wel × fy and A × fy, without buckling, cross-section class or partial safety factors. Not a design check.
This size is also rolled in high-strength steel: S420MC–S700MC version →
Similar Sizes
Explore alternative dimensions that might suit your needs