400×300×10 mm S235JRH Steel Rectangular Hollow Section
400x300x10mm Steel rectangular hollow section in S235JRH, S275J0H, S355J2H to EN 10219, with a primer-coated surface optimised for paint adhesion. Nominal weight 104.065 kg/m.
Minimum order
Minimum 10 t per size. If the size is already in the current production cycle, we can accept orders from 5 t. Standard length 6 m; 4–12 m on request. We confirm the minimum, lead time and grade in your quote.
Add to Quote Request
Select length and quantity to add to your quote cart
Minimum order: 10 t per size (from 5 t if the size is in production)
Applications & Usage
This extra heavy-duty industrial Steel rectangular hollow section is commonly specified for heavy structural supports, load-bearing frames, and demanding industrial applications. The 10mm wall thickness provides exceptional structural integrity while maintaining workability. The applied finish enhances both durability and appearance. Available in standard lengths of 6m, this profile can be easily cut, drilled, and welded to suit your specific requirements.
Technical Specifications
| Specification | Value |
|---|---|
| Dimensions | 400mm × 300mm × 10mm |
| Weight per Meter | 104.065 kg/m |
| Material | Steel |
| Alloy/Grade | S235JRH, S275J0H, S355J2H |
| Standard | EN 10219 |
| Finish | Primer Coated |
| Standard Length | 6m |
| Minimum Order per Size | 10 t |
| Cut-to-Length Range | 4000 – 12000 mm |
Section Properties
Nominal values calculated from nominal dimensions to EN 10219-2.
| Property | Value |
|---|---|
| Cross-sectional area(A) | 133 cm² |
| Second moment of area(Ix) | 30609 cm⁴ |
| Second moment of area(Iy) | 19726 cm⁴ |
| Radius of gyration(ix) | 15.2 cm |
| Radius of gyration(iy) | 12.2 cm |
| Elastic section modulus(Wel,x) | 1530 cm³ |
| Elastic section modulus(Wel,y) | 1315 cm³ |
| Plastic section modulus(Wpl,x) | 1824 cm³ |
| Plastic section modulus(Wpl,y) | 1501 cm³ |
| Torsional inertia constant(It) | 38407 cm⁴ |
| Torsional modulus constant(Ct) | 2132 cm³ |
| Surface area per metre(As) | 1.36 m²/m |
| Length per tonne | 9.61 m |
Grade strength and capacity
Minimum strength of each grade this size is rolled in, with the indicative capacity of the section.
| Grade | Min. yield | Tensile | Bending Wel·fy | Axial A·fy |
|---|---|---|---|---|
| S235JRH | 235 MPa | 360–510 MPa | 360 kNm | 3115 kN |
| S275J0H | 275 MPa | 410–560 MPa | 421 kNm | 3646 kN |
| S355J2H | 355 MPa | 470–630 MPa | 543 kNm | 4706 kN |
Ordered in S355J2H, the S235JRH bending capacity of this size is reached with a 8 mm wall in the same outer size (84.2 kg/m, 19% lighter).
Indicative values from nominal dimensions: Wel × fy and A × fy, without buckling, cross-section class or partial safety factors. Not a design check.
This size is also rolled in high-strength steel: S420MC–S700MC version →
Similar Sizes
Explore alternative dimensions that might suit your needs