200×160×12 mm S235JRH Steel Rectangular Hollow Section
200x160x12mm Steel rectangular hollow section in S235JRH, S275J0H, S355J2H to EN 10219, with a primer-coated surface optimised for paint adhesion. Nominal weight 58.451 kg/m.
Minimum order
Minimum 10 t per size. If the size is already in the current production cycle, we can accept orders from 5 t. Standard length 6 m; 4–12 m on request. We confirm the minimum, lead time and grade in your quote.
Add to Quote Request
Select length and quantity to add to your quote cart
Minimum order: 10 t per size (from 5 t if the size is in production)
Applications & Usage
This extra heavy-duty industrial Steel rectangular hollow section is commonly specified for heavy structural supports, load-bearing frames, and demanding industrial applications. The 12mm wall thickness provides exceptional structural integrity while maintaining workability. The applied finish enhances both durability and appearance. Available in standard lengths of 6m, this profile can be easily cut, drilled, and welded to suit your specific requirements.
Technical Specifications
| Specification | Value |
|---|---|
| Dimensions | 200mm × 160mm × 12mm |
| Weight per Meter | 58.451 kg/m |
| Material | Steel |
| Alloy/Grade | S235JRH, S275J0H, S355J2H |
| Standard | EN 10219 |
| Finish | Primer Coated |
| Standard Length | 6m |
| Minimum Order per Size | 10 t |
| Cut-to-Length Range | 4000 – 12000 mm |
Section Properties
Nominal values calculated from nominal dimensions to EN 10219-2.
| Property | Value |
|---|---|
| Cross-sectional area(A) | 74.5 cm² |
| Second moment of area(Ix) | 3881 cm⁴ |
| Second moment of area(Iy) | 2751 cm⁴ |
| Radius of gyration(ix) | 7.22 cm |
| Radius of gyration(iy) | 6.08 cm |
| Elastic section modulus(Wel,x) | 388 cm³ |
| Elastic section modulus(Wel,y) | 344 cm³ |
| Plastic section modulus(Wpl,x) | 485 cm³ |
| Plastic section modulus(Wpl,y) | 417 cm³ |
| Torsional inertia constant(It) | 5697 cm⁴ |
| Torsional modulus constant(Ct) | 574 cm³ |
| Surface area per metre(As) | 0.658 m²/m |
| Length per tonne | 17.1 m |
Grade strength and capacity
Minimum strength of each grade this size is rolled in, with the indicative capacity of the section.
| Grade | Min. yield | Tensile | Bending Wel·fy | Axial A·fy |
|---|---|---|---|---|
| S235JRH | 235 MPa | 360–510 MPa | 91.2 kNm | 1750 kN |
| S275J0H | 275 MPa | 410–560 MPa | 107 kNm | 2048 kN |
| S355J2H | 355 MPa | 470–630 MPa | 138 kNm | 2643 kN |
Ordered in S355J2H, the S235JRH bending capacity of this size is reached with a 8 mm wall in the same outer size (41.5 kg/m, 29% lighter).
Indicative values from nominal dimensions: Wel × fy and A × fy, without buckling, cross-section class or partial safety factors. Not a design check.
Similar Sizes
Explore alternative dimensions that might suit your needs