180×180×5 mm S235JRH Steel Square Hollow Section
180x180x5mm cold-formed ERW square hollow section to EN 10219, rolled in S235JRH, S275J0H or S355J2H depending on size, supplied with a primer-coated surface optimised for paint adhesion.
Minimum order
Minimum 10 t per size. If the size is already in the current production cycle, we can accept orders from 5 t. Standard length 6 m; 4–12 m on request. We confirm the minimum, lead time and grade in your quote.
Add to Quote Request
Select length and quantity to add to your quote cart
Minimum order: 10 t per size (from 5 t if the size is in production)
Applications & Usage
Equal sides carry load about both axes, so this square hollow section is specified for columns, posts, gates, and frames, and the closed section resists torsion better than an open profile of similar weight. Supplied black, with a red-oxide shop primer, or hot-dip galvanized; the internal weld bead can be removed on request on most sizes.
Technical Specifications
| Specification | Value |
|---|---|
| Dimensions | 180mm × 180mm × 5mm |
| Weight per Meter | 26.97 kg/m |
| Material | Steel |
| Alloy/Grade | S235JRH, S275J0H, S355J2H |
| Standard | EN 10219 |
| Finish | Primer Coated |
| Standard Length | 6m |
| Internal Weld Removal | Available on request |
| Minimum Order per Size | 10 t |
| Cut-to-Length Range | 4000 – 12000 mm |
Section Properties
Nominal values calculated from nominal dimensions to EN 10219-2.
| Property | Value |
|---|---|
| Cross-sectional area(A) | 34.4 cm² |
| Second moment of area(I) | 1737 cm⁴ |
| Radius of gyration(i) | 7.11 cm |
| Elastic section modulus(Wel) | 193 cm³ |
| Plastic section modulus(Wpl) | 224 cm³ |
| Torsional inertia constant(It) | 2724 cm⁴ |
| Torsional modulus constant(Ct) | 290 cm³ |
| Surface area per metre(As) | 0.703 m²/m |
| Length per tonne | 37.1 m |
Grade strength and capacity
Minimum strength of each grade this size is rolled in, with the indicative capacity of the section.
| Grade | Min. yield | Tensile | Bending Wel·fy | Axial A·fy |
|---|---|---|---|---|
| S235JRH | 235 MPa | 360–510 MPa | 45.4 kNm | 807 kN |
| S275J0H | 275 MPa | 410–560 MPa | 53.1 kNm | 945 kN |
| S355J2H | 355 MPa | 470–630 MPa | 68.5 kNm | 1220 kN |
Indicative values from nominal dimensions: Wel × fy and A × fy, without buckling, cross-section class or partial safety factors. Not a design check.
Nearest inch size to ASTM A500: HSS 7 × 7 × 3/16 →
This size is also rolled in high-strength steel: S420MC–S700MC version →
Similar Sizes
Explore alternative dimensions that might suit your needs