Aluminium Equal Angle 6063-T6

Extruded EN AW-6063 T6 aluminium equal angle for framing, fabrication, enclosures, and architectural trim. Available in standard stock lengths and cut-to-length options.

Choose a size below and add it to your quote.

Applications & Selection Guide

Extruded aluminium equal angle in EN AW-6063 T6 to EN 755-2, with two legs of the same length. It is light, corrosion resistant and easy to cut, drill and fix.

Equal angle is used for frames, brackets, edge protection, enclosures and architectural trim. Sizes run from 10×10×1.2 mm to 100×100×10 mm.

Standard length is 6 m, with 1–5 m lengths and cut-to-length on request. Minimum order is 100 kg per size; sizes we do not hold are extruded to order from 300 kg. Supplied mill finish, with anodized or powder-coated finish on request — send size, length, quantity and destination in a quote request.

Technical guides

Aluminium alloy grades: 1050, 5754, 6060, 6063, 6082, 6061 and 7075 compared

How the common aluminium alloys differ in strength, corrosion resistance, weldability, anodizing and machining, what tempers such as T6, H14 and H111 mean, and which alloy to choose for profiles, bars and sheet.

Read the guide →

Aluminium profile sizes and weights: box section, round tube, angle and channel in 6063-T6

Size and weight tables for aluminium square and rectangular tube (box section), round tube, equal and unequal angle and channel in EN AW-6063 T6, with the kg/m formulas and a comparison with steel.

Read the guide →

Angle sizes and weights: steel, stainless and aluminium equal and unequal angles

Weight per metre and cross-section area of hot-rolled equal steel angles to EN 10056-1 from 20 × 20 × 3 to 120 × 120 × 12, plus stainless 304 and aluminium 6063 angles, the kg/m formula and how angles are designated.

Read the guide →

Metal weight calculator

Free metal weight calculator: kg/m and total weight of steel, stainless and aluminium tubes, bars, angles and sheet. Formulas and densities explained.

→