Steel Threaded Rod 4.8
ISO 898-1 property class 4.8 carbon steel fully threaded rod manufactured to DIN 975 / DIN 976. Continuous metric thread supports fastening, suspension, anchoring, and general fabrication applications. Available in M4–M64 diameters and standard 1 m lengths.
Choose a size below and add it to your quote.
Available Sizes & Finishes
24 sizes available
Filters
Diameter (mm)
Applications & Selection Guide
ISO 898-1 property class 4.8 fully threaded carbon-steel rod to DIN 975 / DIN 976, ISO metric coarse pitch, supplied in 1 m stock lengths. Nominal tensile strength 400 MPa (yield ≈ 320 MPa) — the economical continuous-thread bar for light hangers, clamps, and fabricated studs. Diameters M4–M64 are listed above.
Cut to length on site for pipe hangers, cable trays, light machinery levelling, and general fabrication. Pair with class 5 hex nuts (DIN 934) and Form A washers; a coupling nut (DIN 6334 class 5) joins two rods when a longer stud is needed. For higher-load supports and plant anchoring step up to class 8.8 rod. Zinc electroplating or hot-dip galvanizing can be quoted for exposed service.
Sold per 1 m length. Add diameter, quantity, coating, and delivery country to your quote cart — matching class 5 nuts, washers, and coupling nuts can go in the same enquiry.
Technical guides
Bolt grades and sizes: 8.8, 10.9, 12.9, A2 and A4, and metric hex bolt dimensions
What the property classes 4.8, 8.8, 10.9 and 12.9 and stainless A2-70 and A4-70 mean, minimum strength and tensile loads, metric thread pitch and hex head sizes, DIN 933 vs DIN 931, and which nut goes with which bolt.
Read the guide →Threaded rod sizes and weights: DIN 975 / DIN 976-1 metric rod from M4 to M64
Thread pitch, stress area and weight per metre of metric threaded rod from M4 to M64 in carbon steel class 4.8 and 8.8 and in A2 and A4 stainless steel.
Read the guide →Product Information
Material Grade
ISO 898-1 class 4.8
Manufacturing Standard
DIN 975 / DIN 976
Material Type
Steel
Category
Threaded Rod
Ready to request pricing?
Add sizes to your quote cart, or paste your full list — Excel, CSV, or plain text.