Loading...

ХолодногнутаERW прямокутна порожниста секція до EN 10219, виготовлена з S235JR та S275. Глибша сторона додає жорсткість при згинанні в одній площині, тому цей профіль використовується для балок, перемичок, причепних рам та шасі. Розміри варіюються від 30×20 мм до 500×450 мм, зі стінками від 1,5 мм до 18 мм залежно від розміру. Стандартна довжина – 6 м. Наявність залежить від розміру. Постачається без покриття, з червоним оксидним цеховим грунтом або гарячоцинковане.
Choose a size below and add it to your quote. We typically reply within one business day.
Доступно 325 розмірів
Rectangular hollow sections are cold-formed and ERW-welded to EN 10219, in S235JR and S275. The deeper side adds bending stiffness in one plane, for beams, lintels, trailer frames, and chassis.
Sizes run from 30×20 mm to 500×450 mm, with walls from 1.5 mm to 18 mm depending on size. The weld bead stays in the bore unless removal is agreed at order. Finish is uncoated, red-oxide shop primer, or hot-dip galvanized. Where the section must work equally about both axes, square box is the simpler choice. S355 rectangular box is the higher-yield section.
Standard length is 6 m, quoted per length. Availability depends on the size. Send height × width × wall, quantity, finish, and delivery country in a quote request.
S235JR
EN 10219
Сталь
Профіль прямокутний порожнистий
Have a longer list or Excel file? Send your list
Add sizes to your quote cart, or paste your full list — Excel, CSV, or plain text.