Profile Section
105mm Steel Round Bar
105mm Steel round bar in S235JR, S275JR, S355JR, S355J2, ASTM A36, ASTM A572, ASTM A615, SAE 1010, SAE 1020, SAE 1030, SAE 1035, SAE 1040, SAE 1045, SAE 1060, ST 37-2, ST 44-2, ST 52-3, ST 60 to DIN 1014 / ASTM A6, with an uncoated steel surface suitable for further processing or painting. Nominal weight 67.973266 kg/m.
Minimum order
Minimum 5 t per size. Standard length 6 m; other lengths on request. We confirm the grade, tolerances and lead time in your quote.
Add to Quote Request
Select length and quantity to add to your quote cart
Minimum order: 13 pieces
Minimum order: 5,000 kg per size
Applications & Usage
This extra heavy-duty industrial Steel round bar is commonly specified for heavy structural supports, load-bearing frames, and demanding industrial applications. The 105mm diameter provides exceptional structural integrity while maintaining workability. The natural mill finish provides a cost-effective solution for applications where aesthetics are secondary. Available in standard lengths of 6m, this profile can be easily cut, drilled, and welded to suit your specific requirements.
Technical Specifications
| Specification | Value |
|---|---|
| Dimensions | Ø 105mm |
| Weight per Meter | 67.973 kg/m |
| Material | Steel |
| Alloy/Grade | S235JR, S275JR, S355JR, S355J2, ASTM A36, ASTM A572, ASTM A615, SAE 1010, SAE 1020, SAE 1030, SAE 1035, SAE 1040, SAE 1045, SAE 1060, ST 37-2, ST 44-2, ST 52-3, ST 60 |
| Standard | DIN 1014 / ASTM A6 |
| Available Lengths | 6m |
| Full Stock Length | 6 m |
| Minimum Order per Size | 5 t |
Grades and mechanical properties
Minimum values for a governing thickness of 105 mm.
| Grade | Min. yield | Tensile strength | Min. elongation A (%) | Impact test (KV) |
|---|---|---|---|---|
| S235JREN 10025-2 | 195 MPa | 350–500 MPa | 22 | 27 J at +20 °C |
| S275JREN 10025-2 | 225 MPa | 400–540 MPa | 19 | 27 J at +20 °C |
| S355JREN 10025-2 | 295 MPa | 450–600 MPa | 18 | 27 J at +20 °C |
| S355J2EN 10025-2 | 295 MPa | 450–600 MPa | 18 | 27 J at −20 °C |
| ASTM A36 | 250 MPa (36 ksi) | 400–550 MPa (58–80 ksi) | 20 (200 mm) / 23 (50 mm) | — |
SAE 1010–1060 and the ST 37-2 to ST 60 designations are supplied to chemical composition; their mechanical properties depend on the delivery condition and are confirmed per order. ASTM A615 is a reinforcing-bar standard, quoted on request. Impact values apply from 6 mm; for thin sections (EN below 3 mm, ASTM below 8 mm) the elongation requirement follows separate rules and is given in the test certificate. ASTM A572 values are for Grade 50; please confirm the grade in your enquiry.
Similar Sizes
Explore alternative dimensions that might suit your needs