400×200×10 mm S420MC–S700MC High-Strength Rectangular Hollow Section
400x200x10mm Steel high-strength rectangular tube in S420MC, S500MC, S600MC, S700MC to EN 10219 / EN 10149-2, with an uncoated steel surface suitable for further processing or painting. Nominal weight 88.365 kg/m.
Minimum order
Minimum 10 t per size. If the size is already in the current production cycle, we can accept orders from 5 t. Standard length 6 m; 4–12 m on request. We confirm the minimum, lead time and grade in your quote.
Add to Quote Request
Select length and quantity to add to your quote cart
Minimum order: 10 t per size (from 5 t if the size is in production)
Applications & Usage
This extra heavy-duty industrial Steel high-strength rectangular tube is commonly specified for heavy structural supports, load-bearing frames, and demanding industrial applications. The 10mm wall thickness provides exceptional structural integrity while maintaining workability. The natural mill finish provides a cost-effective solution for applications where aesthetics are secondary. Available in standard lengths of 6m, this profile can be easily cut, drilled, and welded to suit your specific requirements.
Technical Specifications
| Specification | Value |
|---|---|
| Dimensions | 400mm × 200mm × 10mm |
| Weight per Meter | 88.365 kg/m |
| Material | Steel |
| Alloy/Grade | S420MC, S500MC, S600MC, S700MC |
| Standard | EN 10219 / EN 10149-2 |
| Standard Length | 6m |
| Minimum Order per Size | 10 t |
| Cut-to-Length Range | 4000 – 12000 mm |
Section Properties
Nominal values calculated from nominal dimensions to EN 10219-2.
| Property | Value |
|---|---|
| Cross-sectional area(A) | 113 cm² |
| Second moment of area(Ix) | 23003 cm⁴ |
| Second moment of area(Iy) | 7864 cm⁴ |
| Radius of gyration(ix) | 14.3 cm |
| Radius of gyration(iy) | 8.36 cm |
| Elastic section modulus(Wel,x) | 1150 cm³ |
| Elastic section modulus(Wel,y) | 786 cm³ |
| Plastic section modulus(Wpl,x) | 1434 cm³ |
| Plastic section modulus(Wpl,y) | 888 cm³ |
| Torsional inertia constant(It) | 19368 cm⁴ |
| Torsional modulus constant(Ct) | 1373 cm³ |
| Surface area per metre(As) | 1.16 m²/m |
| Length per tonne | 11.3 m |
High-strength grades for this size
Strength and indicative capacity for each grade this size is rolled in, compared with the S355J2H wall that carries the same bending load in the same outer size.
| Grade | Min. yield ReH | Tensile Rm | Bending Wel·ReH | Axial A·ReH | S355J2H equivalent |
|---|---|---|---|---|---|
| S420MC | 420 MPa | 480–620 MPa | 483 kNm | 4728 kN | 16 mm · 134 kg/m (+52%) |
| S500MC | 500 MPa | 550–700 MPa | 575 kNm | 5628 kN | 16 mm · 134 kg/m (+52%) |
| S600MC | 600 MPa | 650–820 MPa | 690 kNm | 6754 kN | Beyond the S355J2H range of this size |
| S700MC | 700 MPa | 750–950 MPa | 805 kNm | 7880 kN | Beyond the S355J2H range of this size |
In S500MC, this section (88.4 kg/m) carries the elastic bending load of a 16 mm S355J2H wall in the same outer size (134 kg/m), which is 52% heavier per metre. In S700MC, this section carries more elastic bending load than any S355J2H wall rolled in the same outer size; matching it in S355 needs a larger section.
Indicative values from nominal dimensions: Wel × ReH and A × ReH, without buckling, cross-section class or partial safety factors. Not a design check.
Similar Sizes
Explore alternative dimensions that might suit your needs