80×60×6.3 mm S235JRH Steel Rectangular Hollow Section
80x60x6.3mm Steel rectangular hollow section in S235JRH, S275J0H, S355J2H to EN 10219, with a primer-coated surface optimised for paint adhesion. Nominal weight 11.531 kg/m.
Minimum order
Minimum 10 t per size. If the size is already in the current production cycle, we can accept orders from 5 t. Standard length 6 m; 4–12 m on request. We confirm the minimum, lead time and grade in your quote.
Add to Quote Request
Select length and quantity to add to your quote cart
Minimum order: 10 t per size (from 5 t if the size is in production)
Applications & Usage
This extra heavy-duty industrial Steel rectangular hollow section is commonly specified for heavy structural supports, load-bearing frames, and demanding industrial applications. The 6.3mm wall thickness provides exceptional structural integrity while maintaining workability. The applied finish enhances both durability and appearance. Available in standard lengths of 6m, this profile can be easily cut, drilled, and welded to suit your specific requirements.
Technical Specifications
| Specification | Value |
|---|---|
| Dimensions | 80mm × 60mm × 6.3mm |
| Weight per Meter | 11.531 kg/m |
| Material | Steel |
| Alloy/Grade | S235JRH, S275J0H, S355J2H |
| Standard | EN 10219 |
| Finish | Primer Coated |
| Standard Length | 6m |
| Internal Weld Removal | Available on request |
| Minimum Order per Size | 10 t |
| Cut-to-Length Range | 4000 – 12000 mm |
Section Properties
Nominal values calculated from nominal dimensions to EN 10219-2.
| Property | Value |
|---|---|
| Cross-sectional area(A) | 14.7 cm² |
| Second moment of area(Ix) | 114 cm⁴ |
| Second moment of area(Iy) | 72.7 cm⁴ |
| Radius of gyration(ix) | 2.79 cm |
| Radius of gyration(iy) | 2.22 cm |
| Elastic section modulus(Wel,x) | 28.6 cm³ |
| Elastic section modulus(Wel,y) | 24.2 cm³ |
| Plastic section modulus(Wpl,x) | 36.8 cm³ |
| Plastic section modulus(Wpl,y) | 30.2 cm³ |
| Torsional inertia constant(It) | 160 cm⁴ |
| Torsional modulus constant(Ct) | 40.9 cm³ |
| Surface area per metre(As) | 0.253 m²/m |
| Length per tonne | 86.7 m |
Grade strength and capacity
Minimum strength of each grade this size is rolled in, with the indicative capacity of the section.
| Grade | Min. yield | Tensile | Bending Wel·fy | Axial A·fy |
|---|---|---|---|---|
| S235JRH | 235 MPa | 360–510 MPa | 6.71 kNm | 345 kN |
| S275J0H | 275 MPa | 410–560 MPa | 7.85 kNm | 404 kN |
| S355J2H | 355 MPa | 470–630 MPa | 10.1 kNm | 521 kN |
Ordered in S355J2H, the S235JRH bending capacity of this size is reached with a 3.5 mm wall in the same outer size (7.06 kg/m, 39% lighter).
Indicative values from nominal dimensions: Wel × fy and A × fy, without buckling, cross-section class or partial safety factors. Not a design check.
Similar Sizes
Explore alternative dimensions that might suit your needs