500×250×12.5 mm S235JRH Steel Rectangular Hollow Section
500x250x12.5mm Steel rectangular hollow section in S235JRH, S275J0H, S355J2H to EN 10219, with an uncoated steel surface suitable for further processing or painting. Nominal weight 137.017 kg/m.
Minimum order
Minimum 10 t per size. If the size is already in the current production cycle, we can accept orders from 5 t. Standard length 6 m; 4–12 m on request. We confirm the minimum, lead time and grade in your quote.
Add to Quote Request
Select length and quantity to add to your quote cart
Minimum order: 10 t per size (from 5 t if the size is in production)
Applications & Usage
This extra heavy-duty industrial Steel rectangular hollow section is commonly specified for heavy structural supports, load-bearing frames, and demanding industrial applications. The 12.5mm wall thickness provides exceptional structural integrity while maintaining workability. The natural mill finish provides a cost-effective solution for applications where aesthetics are secondary. Available in standard lengths of 6m, this profile can be easily cut, drilled, and welded to suit your specific requirements.
Technical Specifications
| Specification | Value |
|---|---|
| Dimensions | 500mm × 250mm × 12.5mm |
| Weight per Meter | 137.017 kg/m |
| Material | Steel |
| Alloy/Grade | S235JRH, S275J0H, S355J2H |
| Standard | EN 10219 |
| Standard Length | 6m |
| Minimum Order per Size | 10 t |
| Cut-to-Length Range | 4000 – 12000 mm |
Section Properties
Nominal values calculated from nominal dimensions to EN 10219-2.
| Property | Value |
|---|---|
| Cross-sectional area(A) | 175 cm² |
| Second moment of area(Ix) | 55303 cm⁴ |
| Second moment of area(Iy) | 18983 cm⁴ |
| Radius of gyration(ix) | 17.8 cm |
| Radius of gyration(iy) | 10.4 cm |
| Elastic section modulus(Wel,x) | 2212 cm³ |
| Elastic section modulus(Wel,y) | 1519 cm³ |
| Plastic section modulus(Wpl,x) | 2766 cm³ |
| Plastic section modulus(Wpl,y) | 1717 cm³ |
| Torsional inertia constant(It) | 47400 cm⁴ |
| Torsional modulus constant(Ct) | 2676 cm³ |
| Surface area per metre(As) | 1.44 m²/m |
| Length per tonne | 7.30 m |
Grade strength and capacity
Minimum strength of each grade this size is rolled in, with the indicative capacity of the section.
| Grade | Min. yield | Tensile | Bending Wel·fy | Axial A·fy |
|---|---|---|---|---|
| S235JRH | 235 MPa | 360–510 MPa | 520 kNm | 4102 kN |
| S275J0H | 275 MPa | 410–560 MPa | 608 kNm | 4800 kN |
| S355J2H | 355 MPa | 470–630 MPa | 785 kNm | 6196 kN |
Ordered in S355J2H, the S235JRH bending capacity of this size is reached with a 8 mm wall in the same outer size (90.5 kg/m, 34% lighter).
Indicative values from nominal dimensions: Wel × fy and A × fy, without buckling, cross-section class or partial safety factors. Not a design check.
Similar Sizes
Explore alternative dimensions that might suit your needs