30×20×1.5 mm S235JRH Steel Rectangular Hollow Section
30x20x1.5mm Steel rectangular hollow section in S235JRH, S275J0H, S355J2H to EN 10219, with a primer-coated surface optimised for paint adhesion. Nominal weight 1.061 kg/m.
Minimum order
Minimum 10 t per size. If the size is already in the current production cycle, we can accept orders from 5 t. Standard length 6 m; 4–12 m on request. We confirm the minimum, lead time and grade in your quote.
Add to Quote Request
Select length and quantity to add to your quote cart
Minimum order: 10 t per size (from 5 t if the size is in production)
Applications & Usage
This lightweight and decorative Steel rectangular hollow section is commonly specified for trim work, framing, display systems, and interior design projects. The 1.5mm wall thickness provides adequate strength for light-duty applications while maintaining workability. The applied finish enhances both durability and appearance. Available in standard lengths of 6m, this profile can be easily cut, drilled, and welded to suit your specific requirements.
Technical Specifications
| Specification | Value |
|---|---|
| Dimensions | 30mm × 20mm × 1.5mm |
| Weight per Meter | 1.061 kg/m |
| Material | Steel |
| Alloy/Grade | S235JRH, S275J0H, S355J2H |
| Standard | EN 10219 |
| Finish | Primer Coated |
| Standard Length | 6m |
| Minimum Order per Size | 10 t |
| Cut-to-Length Range | 4000 – 12000 mm |
Section Properties
Nominal values calculated from nominal dimensions to EN 10219-2.
| Property | Value |
|---|---|
| Cross-sectional area(A) | 1.35 cm² |
| Second moment of area(Ix) | 1.59 cm⁴ |
| Second moment of area(Iy) | 0.840 cm⁴ |
| Radius of gyration(ix) | 1.08 cm |
| Radius of gyration(iy) | 0.788 cm |
| Elastic section modulus(Wel,x) | 1.06 cm³ |
| Elastic section modulus(Wel,y) | 0.840 cm³ |
| Plastic section modulus(Wpl,x) | 1.32 cm³ |
| Plastic section modulus(Wpl,y) | 0.993 cm³ |
| Torsional inertia constant(It) | 1.83 cm⁴ |
| Torsional modulus constant(Ct) | 1.40 cm³ |
| Surface area per metre(As) | 0.0948 m²/m |
| Length per tonne | 942 m |
Grade strength and capacity
Minimum strength of each grade this size is rolled in, with the indicative capacity of the section.
| Grade | Min. yield | Tensile | Bending Wel·fy | Axial A·fy |
|---|---|---|---|---|
| S235JRH | 235 MPa | 360–510 MPa | 0.249 kNm | 31.8 kN |
| S275J0H | 275 MPa | 430–580 MPa | 0.291 kNm | 37.2 kN |
| S355J2H | 355 MPa | 510–680 MPa | 0.375 kNm | 48.0 kN |
Indicative values from nominal dimensions: Wel × fy and A × fy, without buckling, cross-section class or partial safety factors. Not a design check.
This size is also rolled in high-strength steel: S420MC–S700MC version →
Similar Sizes
Explore alternative dimensions that might suit your needs