Loading...
Profile Section
The 40x40x2mm steel Omega (hat) profile is cold roll-formed to EN 10162 with a 40 mm height, 40 mm crown and 2 mm sheet thickness, weighing a nominal 2.53 kg/m. Produced to order in galvanized DX51D+Z steel, its outward feet provide a flat fixing face on both sides — the standard rail for solar panel mounting, facade furring and sheet-metal substructures.
Omega 40x40x2 mounts solar panels on trapezoidal and sandwich roofs, levels facade cladding as a furring profile, stiffens large sheet-metal panels, and builds conveyor and machine substructures. Both feet sit flat on the support, spreading load evenly and allowing fast one-sided fixing. At a nominal 2.53 kg/m and cut-to-length production from 1 to 15 m, material usage is optimized with no offcuts on site. Minimum production run is approximately 500 kg per size and coating — add your sizes to a quote request and our team confirms exact tonnage, lead time and delivered pricing.
| Specification | Value |
|---|---|
| Dimensions | 40mm × 40mm × 2mm |
| Weight per Meter | 2.526 kg/m |
| Material | Steel |
| Alloy/Grade | DX51D+Z275 |
| Standard | EN 10162 / EN 10346 |
| Profile Type | Omega (Ω / hat) |
| Developed Width | ≈ 161 mm |
| Minimum Production Run | ≈ 500 kg |
| Finish | DX51D+Z Galvanized |
| Available Lengths | 6m, 12m |
| Standard Length | 6 m |
| Minimum Order Length | 198 m |
| Cut-to-Length Range | 1000 – 15000 mm |
This profile is roll-formed to order in your exact length (1–15 m; longer on project basis). Minimum production run is approx. 500 kg per size and coating. Add your sizes to a quote request and our team confirms lead time and pricing within one business day.
This profile is roll-formed to order in your exact length (1–15 m; longer on project basis). Minimum production run is approx. 500 kg per size and coating. Add your sizes to a quote request and our team confirms lead time and pricing within one business day.
Request a quote for current pricing.
Select length and quantity to add to your quote cart
Minimum order: 17 pieces
Minimum total length: 198 m
Any length from 1 to 15 m — no offcut waste on site
Pre-galvanized (DX51D+Z / S350GD+Z), uncoated cold-rolled, Aluzinc and pre-painted RAL on request
Mounting holes and slots punched to your drawing during roll forming
Produced to EN 10162; EN 10204 3.1 mill certificates available
Explore alternative dimensions that might suit your needs
