Profile Section
60x15mm Cold Drawn Steel Flat Bar
60x15mm Steel cold drawn flat bar in S235JR, S275JR, S355JR, S355J2, ASTM A36, ASTM A572, ASTM A615, SAE 1010, SAE 1020, SAE 1030, SAE 1035, SAE 1040, SAE 1045, SAE 1060, ST 37-2, ST 44-2, ST 52-3, ST 60 to DIN 1014 / ASTM A6, with an uncoated steel surface suitable for further processing or painting. Nominal weight 7.065 kg/m.
Minimum order
Minimum 5 t per size. Standard length 3 m / 6 m; other lengths on request. We confirm the grade, tolerances and lead time in your quote.
Add to Quote Request
Select length and quantity to add to your quote cart
Minimum order: 118 pieces
Minimum order: 5,000 kg per size
Applications & Usage
This medium-duty Steel cold drawn flat bar is commonly specified for furniture manufacturing, enclosures, brackets, and general fabrication. The 15mm section provides excellent strength-to-weight ratio while maintaining workability. The natural mill finish provides a cost-effective solution for applications where aesthetics are secondary. Available in standard lengths of 3m, 6m, this profile can be easily cut, drilled, and welded to suit your specific requirements.
Technical Specifications
| Specification | Value |
|---|---|
| Dimensions | 60mm × 15mm |
| Weight per Meter | 7.065 kg/m |
| Material | Steel |
| Alloy/Grade | S235JR, S275JR, S355JR, S355J2, ASTM A36, ASTM A572, ASTM A615, SAE 1010, SAE 1020, SAE 1030, SAE 1035, SAE 1040, SAE 1045, SAE 1060, ST 37-2, ST 44-2, ST 52-3, ST 60 |
| Standard | DIN 1014 / ASTM A6 |
| Available Lengths | 3m, 6m |
| Full Stock Length | 6 m |
| Minimum Order per Size | 5 t |
Grades and mechanical properties
Minimum values for a governing thickness of 15 mm.
| Grade | Min. yield | Tensile strength | Min. elongation A (%) | Impact test (KV) |
|---|---|---|---|---|
| S235JREN 10025-2 | 235 MPa | 360–510 MPa | 26 | 27 J at +20 °C |
| S275JREN 10025-2 | 275 MPa | 410–560 MPa | 23 | 27 J at +20 °C |
| S355JREN 10025-2 | 355 MPa | 470–630 MPa | 22 | 27 J at +20 °C |
| S355J2EN 10025-2 | 355 MPa | 470–630 MPa | 22 | 27 J at −20 °C |
| ASTM A36 | 250 MPa (36 ksi) | 400–550 MPa (58–80 ksi) | 20 (200 mm) / 23 (50 mm) | — |
| ASTM A572 Gr. 50 | 345 MPa (50 ksi) | ≥ 450 MPa (≥ 65 ksi) | 18 (200 mm) / 21 (50 mm) | — |
These are the hot-rolled minimums of each grade; cold drawing raises strength and lowers elongation, and the drawn (+C) values are confirmed per order.
SAE 1010–1060 and the ST 37-2 to ST 60 designations are supplied to chemical composition; their mechanical properties depend on the delivery condition and are confirmed per order. ASTM A615 is a reinforcing-bar standard, quoted on request. Impact values apply from 6 mm; for thin sections (EN below 3 mm, ASTM below 8 mm) the elongation requirement follows separate rules and is given in the test certificate. ASTM A572 values are for Grade 50; please confirm the grade in your enquiry.
Similar Sizes
Explore alternative dimensions that might suit your needs