30x30x3mm Stainless Steel Angle Bar 304
30x30x3mm Stainless Steel angle bar in AISI 304 / 1.4301 to EN 10056-1, with natural mill finish. Nominal weight 1.36 kg/m.
Add to Quote Request
Select length and quantity to add to your quote cart
Applications & Usage
Typical uses for this angle bar: furniture, enclosures, brackets and general fabrication. Wall thickness 3 mm: a good balance of strength and weight. Supplied in the bare mill finish, without coating, which keeps cost down where appearance is secondary. Standard lengths: 1m, 1.5m, 2m, 2.5m, 3m.
Technical Specifications
| Specification | Value |
|---|---|
| Dimensions | 30mm × 30mm × 3mm |
| Weight per Meter | 1.356 kg/m |
| Weight of a 1 m length | 1.4 kg |
| Weight of a 1.5 m length | 2 kg |
| Weight of a 2 m length | 2.7 kg |
| Material | Stainless Steel |
| Alloy/Grade | AISI 304 / 1.4301 |
| Standard | EN 10056-1 |
| Available Lengths | 1m, 1.5m, 2m, 2.5m, 3m |
| Full Stock Length | 6 m |
Similar Sizes
Explore alternative dimensions that might suit your needs
Same size in other materials
Technical guides
304 vs 316 stainless steel: composition, strength, corrosion resistance and when to use each
How 304 (1.4301) and 316 (1.4401/1.4404) stainless steel differ in composition, PREN, strength and chloride resistance, what the L grades and A2/A4 fasteners mean, and which grade to choose.
Read the guide →Angle sizes and weights: steel, stainless and aluminium equal and unequal angles
Weight per metre and cross-section area of hot-rolled equal steel angles to EN 10056-1 from 20 × 20 × 3 to 120 × 120 × 12, plus stainless 304 and aluminium 6063 angles, the kg/m formula and how angles are designated.
Read the guide →Stainless steel bar weight chart: round, square, hexagon, flat bar and angle (kg/m)
Weight per metre of 304, 303 and 316L stainless round, square, hexagon and flat bar and equal angle, with the formulas and the weight of a 6 m bar.
Read the guide →Metal weight calculator
Free metal weight calculator: kg/m and total weight of steel, stainless and aluminium tubes, bars, angles and sheet. Formulas and densities explained.
→