Fabrication/Livestock barn
Livestock barn
Barn and livestock building steel on the same kit model as our hangars — sized from your dimensions, with coatings chosen for ammonia-rich air.
You send the building. We take off the steel.
This is not a catalogue quote. You do not pick HEA, box, or purlin sizes here. You send span, length, height, and loads — or drawings. We calculate the bill of materials and quote fabrication of that kit.
Typical sizes are only a starting grid so you can see area and bays. The price is the steel we take off for your project: frames, purlins, bracing, plates, and bolts, marked for your crew to erect.
Typical hall sizes we quote from
Starting dimensions for a first takeoff — not stock buildings. Any span and length can be sent.
| Span × length × eave | Floor area | Typical bays | Often used as | Start a quote |
|---|---|---|---|---|
| 12 × 24 × 5 m | 288 m² | 4 | Workshop | Design this |
| 15 × 30 × 6 m | 450 m² | 5 | Workshop | Design this |
| 18 × 36 × 6 m | 648 m² | 6 | Warehouse | Design this |
| 20 × 40 × 6 m | 800 m² | 7 | Warehouse | Design this |
| 20 × 50 × 7 m | 1,000 m² | 8 | Warehouse | Design this |
| 25 × 50 × 7 m | 1,250 m² | 8 | Warehouse | Design this |
| 25 × 60 × 8 m | 1,500 m² | 10 | Warehouse | Design this |
| 30 × 60 × 8 m | 1,800 m² | 10 | Warehouse | Design this |
Bay count assumes 6 m spacing for a first look. The quoted frame follows your loads, openings, and drawings.
Included
- Takeoff from your dimensions or submitted drawings, and a clear fabrication scope — not structural design or permit drawings
- Cutting, drilling, and welding to the agreed specification
- Shop primer or the coating stated on the quote
- Piece marking, packing list, and erection drawings
- Bolt and plate sets for the steel kit
- Mill certificates (EN 10204 3.1) on request
Not included
- Site erection and supervision
- Foundations, slabs, and civil works
- Local building permits and design liability in your country
- Site erection cranes, site labour, and installation tools
Steel livestock barns, fabricated as a kit
Livestock buildings follow the same kit model as our agricultural hangars: you send span, length, eave height and loads, or a sketch of the layout, and we take off the frames, purlins, bracing and bolts.
Air in livestock buildings carries ammonia and moisture, so corrosion protection matters. Cold-formed purlins and girts can be rolled from Magnelis (ZM) coated strip, and frames can be hot-dip galvanized after fabrication. Confirm the coating system with your engineer for the expected exposure.
Open sides, ventilation ridges, feed passages and pen layouts are taken from your drawings. The kit ships piece-marked with erection drawings; the typical hall sizes are only a starting grid.
Questions about this kit
- Which coating should a barn have?
- For ammonia-rich air, ZM-coated purlins and hot-dip galvanized frames are common choices. The final choice depends on the site and the design life your specification requires.
- Can you follow a layout from our farm designer?
- Yes. Send the drawings and we take off the steel from them, including openings and pen-related members shown on the plans.
- Do you supply the pens and equipment?
- No. We fabricate the building steel. Pens, feeding systems and other equipment stay with your equipment supplier.
Design the hall
Set the size, see the frame, then send it. Price range in 24 hours. Firm quote in 2–3 business days.
Hall designer
Change the dimensions. The frame updates. No fake instant price — a real fabrication quote follows.
Step 1 of 3