Loading...

Čtvercový dutý profil vyráběný za studena metodou ERW podle EN 10219, vyráběný ze S235JR a S275. Stejné strany jsou vhodné pro sloupy, stojiny, brány a rámy zatížené kolem obou os. Rozměry se pohybují od 20×20 mm do 500×500 mm se stěnami od 1,5 mm do 18 mm v závislosti na velikosti. Standardní délka je 6 m. Dostupnost závisí na velikosti. Dodáván bez povlaku, se zásaditým antikorozním nátěrem nebo horkým pozinkováním.
Choose a size below and add it to your quote. We typically reply within one business day.
136 dostupných rozměrů
Square hollow sections are cold-formed and electric-resistance welded to EN 10219, in S235JR and S275. Equal sides make this the closed section for columns, posts, gates, and frames that see load from more than one direction.
Sizes run from 20×20 mm to 500×500 mm, with walls from 1.5 mm to 18 mm depending on size. The internal weld is left in the bore unless you ask for it to be removed. Finish is uncoated, red-oxide shop primer, or hot-dip galvanized. For a higher yield at the same size, use the S355 square box.
Standard length is 6 m, quoted per length. Availability depends on the size. Select the size from the table and send quantity and destination in a quote request. We confirm availability, price, and freight with the offer.
S235JR
EN 10219
Ocel
Čtvercový profil
Have a longer list or Excel file? Send your list
Add sizes to your quote cart, or paste your full list — Excel, CSV, or plain text.