Profile Section
360x75x3.5mm S350GD+Z Galvanized Steel U Profile
The 360x75x3.5mm steel U profile is a cold roll-formed plain channel to EN 10162 with a 360 mm web, 75 mm flanges and 3.5 mm sheet thickness, weighing a nominal 14.01 kg/m. Produced to order in galvanized S350GD+Z steel, the open unlipped face slides cleanly over panels and boards, making it the standard track, edge and closure channel in light steel framing and general fabrication — supplied cut to your exact length. This variant is pre-galvanized structural strip S350GD+Z275 to EN 10346, minimum yield about 350 MPa. The zinc coating is already on the coil, which is why this is the standard grade for outdoor purlins and solar structures.
Made to Order — Roll Formed
This profile is roll-formed to order in your exact length (1–15 m; longer on project basis). Minimum production run is approx. 3000 kg per size and grade. Add your sizes to a quote request and our team confirms lead time and pricing within one business day.
Add to Quote Request
Select length and quantity to add to your quote cart
Minimum order: 18 pieces
Minimum total length: 216 m
Optional made-to-order requirements — added to this line for our production team.
Applications & Usage
U 360x75x3.5 serves as top and bottom tracks in light steel framing, edge and closure channels on sandwich panels and trapezoidal sheets, sliding-gate and door guides, machine guards, and cable or pipe routing in industrial fit-outs. Roll forming keeps the channel straight and uniform over the full length, so profiles arrive ready to fix. S350GD+Z275 is the usual specification for solar mounting, roof and wall purlins, and any outdoor structure that needs a structural yield plus a zinc coating from the mill. At a nominal 14.01 kg/m and cut-to-length production from 1 to 15 m, material usage is optimized with no offcuts on site. Minimum production run is approximately 3000 kg per size and grade — add your sizes to a quote request and our team confirms exact tonnage, lead time and delivered pricing.
Technical Specifications
| Specification | Value |
|---|---|
| Dimensions | 360mm × 75mm × 3.5mm |
| Weight per Meter | 14.012 kg/m |
| Material | Steel |
| Alloy/Grade | S350GD+Z275 |
| Standard | EN 10162 / EN 10346 |
| Profile Type | U (plain channel) |
| Developed Width | ≈ 510 mm |
| Cross-Section Area | ≈ 17.85 cm² |
| Moment of Inertia Iₓ | ≈ 3061.8 cm⁴ |
| Moment of Inertia Iᵧ | ≈ 76.7 cm⁴ |
| Section Modulus Wₑₗ,ₓ | ≈ 168.46 cm³ |
| Section Modulus Wₑₗ,ᵧ | ≈ 11.67 cm³ |
| Minimum Production Run | 3 t |
| Finish | S350GD+Z Galvanized |
| Available Lengths | 6m, 12m |
| Standard Length | 6 m |
| Minimum Order Length | 216 m |
| Cut-to-Length Range | 1000 – 15000 mm |
Indicative elastic section properties computed from the nominal centerline (thin-walled, corner radii ignored). For preliminary sizing only — not a substitute for a stamped structural calculation.
Indicative load span (single span, simply supported)
Allowable uniformly-distributed load (kN/m) limited by elastic bending about the strong axis (γ = 1.5 on yield, S350GD+Z275). Deflection is not checked and usually governs long spans. Indicative only — confirm with a project calculation.
| Span | Max UDL |
|---|---|
| 2 m | ≈ 78.62 kN/m |
| 3 m | ≈ 34.94 kN/m |
| 4 m | ≈ 19.65 kN/m |
| 5 m | ≈ 12.58 kN/m |
| 6 m | ≈ 8.74 kN/m |
Made to Order — Roll Formed
This profile is roll-formed to order in your exact length (1–15 m; longer on project basis). Minimum production run is approx. 3000 kg per size and grade. Add your sizes to a quote request and our team confirms lead time and pricing within one business day.
Cut to exact length
Any length from 1 to 15 m — no offcut waste on site
Material options
Pre-galvanized S350GD+Z275 structural strip to EN 10346. Zinc coating is applied to the coil before roll forming.
In-line punching
Mounting holes and slots punched to your drawing during roll forming
Certified quality
Produced to EN 10162; EN 10204 3.1 mill certificates available
Similar Sizes
Explore alternative dimensions that might suit your needs