Profile Section
100x53x1.2mm DX51D+Z Galvanized Steel U Profile
The 100x53x1.2mm steel U profile is a cold roll-formed plain channel to EN 10162 with a 100 mm web, 53 mm flanges and 1.2 mm sheet thickness, weighing a nominal 1.94 kg/m. Produced to order in galvanized DX51D+Z steel, the open unlipped face slides cleanly over panels and boards, making it the standard track, edge and closure channel in light steel framing and general fabrication — supplied cut to your exact length. This variant is pre-galvanized forming-grade strip DX51D+Z275 to EN 10346. It is specified for formability and a zinc coating, not for a stated structural yield — use S350GD+Z when the profile is load-bearing.
Made to Order — Roll Formed
This profile is roll-formed to order in your exact length (1–15 m; longer on project basis). Minimum production run is approx. 3000 kg per size and grade. Add your sizes to a quote request and our team confirms lead time and pricing within one business day.
Add to Quote Request
Select length and quantity to add to your quote cart
Minimum order: 129 pieces
Minimum total length: 1548 m
Optional made-to-order requirements — added to this line for our production team.
Applications & Usage
U 100x53x1.2 serves as top and bottom tracks in light steel framing, edge and closure channels on sandwich panels and trapezoidal sheets, sliding-gate and door guides, machine guards, and cable or pipe routing in industrial fit-outs. Roll forming keeps the channel straight and uniform over the full length, so profiles arrive ready to fix. DX51D+Z275 suits non-structural tracks, edge channels, hat sections and light fabrication where the section must form easily and arrive already galvanized. At a nominal 1.94 kg/m and cut-to-length production from 1 to 15 m, material usage is optimized with no offcuts on site. Minimum production run is approximately 3000 kg per size and grade — add your sizes to a quote request and our team confirms exact tonnage, lead time and delivered pricing.
Technical Specifications
| Specification | Value |
|---|---|
| Dimensions | 100mm × 53mm × 1.2mm |
| Weight per Meter | 1.941 kg/m |
| Material | Steel |
| Alloy/Grade | DX51D+Z275 |
| Standard | EN 10162 / EN 10346 |
| Profile Type | U (plain channel) |
| Developed Width | ≈ 206 mm |
| Cross-Section Area | ≈ 2.47 cm² |
| Moment of Inertia Iₓ | ≈ 41.8 cm⁴ |
| Moment of Inertia Iᵧ | ≈ 7.3 cm⁴ |
| Section Modulus Wₑₗ,ₓ | ≈ 8.26 cm³ |
| Section Modulus Wₑₗ,ᵧ | ≈ 1.83 cm³ |
| Minimum Production Run | 3 t |
| Finish | DX51D+Z Galvanized |
| Available Lengths | 6m, 12m |
| Standard Length | 6 m |
| Minimum Order Length | 1548 m |
| Cut-to-Length Range | 1000 – 15000 mm |
Indicative elastic section properties computed from the nominal centerline (thin-walled, corner radii ignored). For preliminary sizing only — not a substitute for a stamped structural calculation.
Load guidance is provided for structural grades (S235JR, S355JR, S350GD+Z). DX51D+Z275 is a forming grade with no defined structural yield.
Made to Order — Roll Formed
This profile is roll-formed to order in your exact length (1–15 m; longer on project basis). Minimum production run is approx. 3000 kg per size and grade. Add your sizes to a quote request and our team confirms lead time and pricing within one business day.
Cut to exact length
Any length from 1 to 15 m — no offcut waste on site
Material options
Pre-galvanized DX51D+Z275 forming-grade strip to EN 10346. For load-bearing purlins, specify S350GD+Z275 instead.
In-line punching
Mounting holes and slots punched to your drawing during roll forming
Certified quality
Produced to EN 10162; EN 10204 3.1 mill certificates available
Similar Sizes
Explore alternative dimensions that might suit your needs