45×45×1.5 mm S235JRH Steel Square Hollow Section
45x45x1.5mm cold-formed ERW square hollow section to EN 10219, rolled in S235JRH, S275J0H or S355J2H depending on size, supplied with a primer-coated surface optimised for paint adhesion.
Minimum order
Minimum 10 t per size. If the size is already in the current production cycle, we can accept orders from 5 t. Standard length 6 m; 4–12 m on request. We confirm the minimum, lead time and grade in your quote.
Add to Quote Request
Select length and quantity to add to your quote cart
Minimum order: 417 pieces
Minimum order: 10 t per size (from 5 t if the size is in production)
Applications & Usage
Equal sides carry load about both axes, so this square hollow section is specified for columns, posts, gates, and frames, and the closed section resists torsion better than an open profile of similar weight. Supplied black, with a red-oxide shop primer, or hot-dip galvanized; the internal weld bead can be removed on request on most sizes.
Technical Specifications
| Specification | Value |
|---|---|
| Dimensions | 45mm × 45mm × 1.5mm |
| Weight per Meter | 2.003 kg/m |
| Material | Steel |
| Alloy/Grade | S235JRH, S275J0H, S355J2H |
| Standard | EN 10219 |
| Finish | Primer Coated |
| Standard Length | 6m |
| Minimum Order per Size | 10 t |
| Cut-to-Length Range | 4000 – 12000 mm |
Section Properties
Nominal values calculated from nominal dimensions to EN 10219-2.
| Property | Value |
|---|---|
| Cross-sectional area(A) | 2.55 cm² |
| Second moment of area(I) | 7.96 cm⁴ |
| Radius of gyration(i) | 1.77 cm |
| Elastic section modulus(Wel) | 3.54 cm³ |
| Plastic section modulus(Wpl) | 4.13 cm³ |
| Torsional inertia constant(It) | 12.6 cm⁴ |
| Torsional modulus constant(Ct) | 5.31 cm³ |
| Surface area per metre(As) | 0.175 m²/m |
| Length per tonne | 499 m |
Similar Sizes
Explore alternative dimensions that might suit your needs