Ø323.9×9 mm S420MC–S600MC High-Strength Steel Pipe
323.9x9mm Steel high-strength pipe in S420MC, S500MC, S600MC, S700MC to EN 10219 / EN 10149-2, with an uncoated steel surface suitable for further processing or painting. Nominal weight 69.893 kg/m.
Minimum order
Minimum 10 t per size. If the size is already in the current production cycle, we can accept orders from 5 t. Standard length 6 m; 4–12 m on request. We confirm the minimum, lead time and grade in your quote.
Add to Quote Request
Select length and quantity to add to your quote cart
Minimum order: 10 t per size (from 5 t if the size is in production)
Applications & Usage
This extra heavy-duty industrial Steel high-strength pipe is commonly specified for heavy structural supports, load-bearing frames, and demanding industrial applications. The 9mm wall thickness provides exceptional structural integrity while maintaining workability. The natural mill finish provides a cost-effective solution for applications where aesthetics are secondary. Available in standard lengths of 6m, this profile can be easily cut, drilled, and welded to suit your specific requirements.
Technical Specifications
| Specification | Value |
|---|---|
| Dimensions | Ø 323.9mm × 9mm wall |
| Weight per Meter | 69.893 kg/m |
| Material | Steel |
| Alloy/Grade | S420MC, S500MC, S600MC |
| Standard | EN 10219 / EN 10149-2 |
| Standard Length | 6m |
| Minimum Order per Size | 10 t |
| Cut-to-Length Range | 4000 – 12000 mm |
Section Properties
Nominal values calculated from nominal dimensions to EN 10219-2.
| Property | Value |
|---|---|
| Cross-sectional area(A) | 89.0 cm² |
| Second moment of area(I) | 11045 cm⁴ |
| Radius of gyration(i) | 11.1 cm |
| Elastic section modulus(Wel) | 682 cm³ |
| Plastic section modulus(Wpl) | 893 cm³ |
| Torsional inertia constant(It) | 22090 cm⁴ |
| Torsional modulus constant(Ct) | 1364 cm³ |
| Surface area per metre(As) | 1.02 m²/m |
| Length per tonne | 14.3 m |
High-strength grades for this size
Strength and indicative capacity for each grade this size is rolled in, compared with the S355J2H wall that carries the same bending load in the same outer size.
| Grade | Min. yield ReH | Tensile Rm | Bending Wel·ReH | Axial A·ReH | S355J2H equivalent |
|---|---|---|---|---|---|
| S420MC | 420 MPa | 480–620 MPa | 286 kNm | 3740 kN | 12 mm · 92.3 kg/m (+32%) |
| S500MC | 500 MPa | 550–700 MPa | 341 kNm | 4452 kN | 14 mm · 107 kg/m (+53%) |
| S600MC | 600 MPa | 650–820 MPa | 409 kNm | 5342 kN | Beyond the S355J2H range of this size |
In S500MC, this section (69.9 kg/m) carries the elastic bending load of a 14 mm S355J2H wall in the same outer size (107 kg/m), which is 53% heavier per metre. In S600MC, this section carries more elastic bending load than any S355J2H wall rolled in the same outer size; matching it in S355 needs a larger section.
Indicative values from nominal dimensions: Wel × ReH and A × ReH, without buckling, cross-section class or partial safety factors. Not a design check.
Similar Sizes
Explore alternative dimensions that might suit your needs