Loading...
Profil Z me buzë ngurtësuese (purlinë Z) i formuar në të ftohtë sipas EN 10162, i prodhuar sipas porosisë nga shirit i paragalvanizuar S350GD+Z (EN 10346) ose shirit i paveshur i petëzuar në të ftohtë S235JR–S355JR. Lartësi shpine nga 100 deri 400 mm, trashësi 1,5–4 mm. Gjeometria Z lejon që purlinat të futen njëra në tjetrën dhe të mbivendosen mbi mbështetëset, duke formuar linja strukturalisht të vazhdueshme çatie dhe muri. Prerje në çdo gjatësi nga 1 deri 15 m. Sasia minimale e prodhimit rreth 500 kg për dimension dhe veshje.
57 madhësi të disponueshme
Z profiles are cold roll-formed purlin sections to EN 10162 with flanges pointing in opposite directions and stiffening edge lips. The Z geometry is what makes modern roof construction efficient: purlins nest into each other and overlap at supports, creating structurally continuous multi-span lines that carry more load with less steel than simply supported sections. We produce to order from pre-galvanized S350GD+Z strip (EN 10346) — the standard purlin material — or uncoated S235JR–S355JR strip.
Z purlins carry roof and wall cladding on industrial halls, warehouses, agricultural buildings, and solar carports; they also serve as floor joists in light steel construction. Overlap lengths, anti-sag rods, and cleat hole patterns are configured per project, and holes are punched in-line so purlins arrive ready to bolt. Pick the web height and thickness from the table above; each variant page shows the dimensioned cross-section and nominal kg/m for structural pre-sizing.
Made to order in any length from 1 to 15 m, with a minimum production run of approximately 500 kg per size and coating. Send a quote request with your purlin schedule — sizes, lengths, quantities, hole punching if required, and delivery country — and we return lead time and delivered pricing. High-strength S350GD and custom lip geometries are available for optimized designs.
S235JR–S355JR / S350GD+Z
EN 10162 / EN 10346
Çelik
Profil Z
