Loading...
Perfil Omega (de sombrero) perfilado en frío según EN 10162, fabricado bajo pedido a partir de fleje pregalvanizado DX51D+Z / S350GD+Z (EN 10346) o fleje laminado en frío sin recubrimiento S235JR. Alturas de 40 a 100 mm, espesores de 1,5 a 3 mm. Las alas hacia el exterior ofrecen una cara de fijación plana y accesible por ambos lados. Corte a cualquier longitud de 1 a 15 m. Se utiliza como carril de montaje de paneles solares, perfil maestra y de soporte, y subestructuras de transportadores o maquinaria. Lote mínimo de producción de aprox. 500 kg por medida y recubrimiento.
10 tallas disponibles
Omega profiles — also called hat or top-hat sections — are cold roll-formed to EN 10162 with a raised crown, sloped webs, and two outward feet. The closed-trapezoid shape is exceptionally stiff in bending for its weight, and the flat feet give a continuous fixing face on both sides, so the profile mounts flush against panels, sheets, or structure with simple screws or bolts. We produce to order from pre-galvanized DX51D+Z275 / S350GD+Z strip (EN 10346) or uncoated S235JR cold-rolled strip.
Omega profiles serve as solar panel mounting rails on trapezoidal and sandwich roofs, furring and levelling profiles behind facade cladding, stiffeners on large sheet-metal panels, conveyor and machine substructures, and vibration-damping rails under floors and decks. Because both feet sit on the support, loads spread evenly and installation is one-sided and fast. Choose height, crown width, and thickness from the table above — variant pages include the dimensioned cross-section drawing and nominal kg/m.
Made to order with cut lengths from 1 to 15 m and a minimum production run of approximately 500 kg per size and coating. Send the sizes, lengths, and quantities in a quote request and we confirm lead time and delivered pricing. Custom crown widths, foot dimensions, perforations, Aluzinc, and pre-painted RAL strip are available on request.
S235JR / S350GD+Z (DX51D)
EN 10162 / EN 10346
Acero
Perfil Omega
