HSS 1 × 1 × 0.063" (25.4 × 25.4 × 1.6 mm) ASTM A500 Grade B/C Square HSS
25.4x25.4x1.6mm Steel square hss in ASTM A500 Grade B, Grade C to ASTM A500/A500M, with an uncoated steel surface suitable for further processing or painting. Nominal weight 1.14396 kg/m.
Minimum order
Minimum 10 t per size. If the size is already in the current production cycle, we can accept orders from 5 t. Standard length 6 m; 4–12 m on request. We confirm the minimum, lead time and grade in your quote.
Add to Quote Request
Select length and quantity to add to your quote cart
Minimum order: 10 t per size (from 5 t if the size is in production)
Applications & Usage
This lightweight and decorative Steel square hss is commonly specified for trim work, framing, display systems, and interior design projects. The 1.6mm wall thickness provides adequate strength for light-duty applications while maintaining workability. The natural mill finish provides a cost-effective solution for applications where aesthetics are secondary. Available in standard lengths of 6m, this profile can be easily cut, drilled, and welded to suit your specific requirements.
Technical Specifications
| Specification | Value |
|---|---|
| Dimensions | 25.4mm × 25.4mm × 1.6mm |
| Weight per Meter | 1.144 kg/m |
| Material | Steel |
| Alloy/Grade | ASTM A500 Grade B, C |
| Standard | ASTM A500/A500M |
| Standard Length | 6m |
| Designation (inch) | HSS 1 × 1 × 0.063 |
| Weight (lb/ft) | 0.77 lb/ft |
| Minimum Order per Size | 10 t |
| Cut-to-Length Range | 4000 – 12000 mm |
Section Properties
Calculated with the AISC design wall thickness (0.93 × nominal); mass and length per tonne use the nominal wall.
| Property | Value |
|---|---|
| Cross-sectional area(A) | 1.37 cm² |
| Second moment of area(I) | 1.27 cm⁴ |
| Radius of gyration(i) | 0.966 cm |
| Elastic section modulus(Wel) | 1.00 cm³ |
| Plastic section modulus(Wpl) | 1.21 cm³ |
| Torsional inertia constant(It) | 2.10 cm⁴ |
| Torsional modulus constant(Ct) | 1.51 cm³ |
| Surface area per metre(As) | 0.0965 m²/m |
| Length per tonne | 874 m |
Grade strength and capacity
Minimum strength of each grade this size is rolled in, with the indicative capacity calculated on the AISC design wall (0.93 × nominal).
| Grade | Min. yield | Tensile | Bending Wel·fy | Axial A·fy |
|---|---|---|---|---|
| Grade B | 46 ksi (315 MPa) | 58 ksi (400 MPa) | 0.316 kNm · 0.233 kip·ft | 43.0 kN · 9.67 kips |
| Grade C | 50 ksi (345 MPa) | 62 ksi (425 MPa) | 0.346 kNm · 0.255 kip·ft | 47.1 kN · 10.6 kips |
Indicative values from nominal dimensions: Wel × fy and A × fy, without buckling, cross-section class or partial safety factors. Not a design check.
Nearest metric size to EN 10219: 25 × 25 × 1.5 mm →
Similar Sizes
Explore alternative dimensions that might suit your needs