Steel Sleeve Anchor T

Zinc-plated type T sleeve anchors for through-fixing in concrete and solid masonry. The bolt, sleeve, and fixture are assembled together: the anchor passes through the fixture hole and expands in the base material as the nut is tightened. Listed M6–M16.

Use when the fixture is already in place or is offered up as the anchor is installed — plant bases, brackets, and building-services supports. Type T is the through-fix pattern; type F is the fixture-first / different sleeve layout. Medium-duty commercial anchors — not a substitute for a designed chemical or undercut system on high loads. Hole diameter matches the sleeve, not a smaller drop-in.

Choose M×L from the table. Add quantity and destination to the quote cart.

Listed sizes are M6×65, M8×75, M8×110, M10×85, M10×110, M12×90, M14×110 and M16×120; the second figure is the overall length in mm. Because a through-fix anchor passes through the fixture, the length must cover the fixture thickness plus the embedment, so thicker fixtures need the longer size of a diameter. Send the fixture thickness with your quote request and we confirm the length.