Steel

Zinc-plated carbon steel

Steel Sleeve Anchor F

Zinc-plated type F sleeve anchors for fixture-first installation in concrete and solid masonry. Medium-duty expanding sleeve. Listed M6–M12.

Choose a size below and add it to your quote.

Available Sizes & Finishes

11 sizes available

Filters

Diameter (mm)

Thickness (mm)

M6x45

15 g/pc

M6x65

20 g/pc

M8x55

30 g/pc

M8x75

39 g/pc

M8x100

47 g/pc

M10x70

57 g/pc

M10x85

66 g/pc

M10x110

84 g/pc

M12x75

100 g/pc

M12x90

110 g/pc

M12x110

133 g/pc

Applications & Selection Guide

Zinc-plated type F sleeve anchors for medium-duty fastening in concrete and solid masonry. Expanding sleeve geometry intended for fixture installation where the sleeve is set and the fixture is then secured. Listed M6–M12.

Choose type F when the layout matches this sleeve/bolt arrangement; use type T for through-fixing through the fixture in one pass. Same practical limits as other commercial sleeve anchors: correct hole, solid base material, and realistic loads. Not for hollow block unless the product is specifically listed for it (this range is solid masonry / concrete).

Select M×L above. Quote with quantity and destination.

Listed sizes run from M6×45 to M12×110: M6 in 45 and 65 mm, M8 in 55, 75 and 100 mm, M10 in 70, 85 and 110 mm and M12 in 75, 90 and 110 mm. The second figure is the overall length; within one diameter the longer lengths suit thicker fixtures. Send the fixture thickness with your quote request and we confirm the length.

Technical guides

Concrete anchors and rivet nuts: drop-in, sleeve and S-type anchors compared, with sizes

How drop-in, sleeve (type T and F) and S-type expansion anchors differ, which one to choose for concrete and solid masonry, the sizes and piece weights we supply, and when a rivet nut is the right fastener instead.

Read the guide →

Product Information

Material Grade

Zinc-plated carbon steel

Material Type