Ø355.6×10 mm S235JRH Steel Pipe
355.6x10mm Steel steel pipe in S235JRH, S275J0H, S355J2H to EN 10219, with an uncoated steel surface suitable for further processing or painting. Nominal weight 85.23 kg/m.
Minimum order
Minimum 10 t per size. If the size is already in the current production cycle, we can accept orders from 5 t. Standard length 6 m; 4–12 m on request. We confirm the minimum, lead time and grade in your quote.
Add to Quote Request
Select length and quantity to add to your quote cart
Minimum order: 10 t per size (from 5 t if the size is in production)
Applications & Usage
This extra heavy-duty industrial Steel steel pipe is commonly specified for heavy structural supports, load-bearing frames, and demanding industrial applications. The 10mm wall thickness provides exceptional structural integrity while maintaining workability. The natural mill finish provides a cost-effective solution for applications where aesthetics are secondary. Available in standard lengths of 6m, this profile can be easily cut, drilled, and welded to suit your specific requirements.
Technical Specifications
| Specification | Value |
|---|---|
| Dimensions | Ø 355.6mm × 10mm wall |
| Weight per Meter | 85.23 kg/m |
| Material | Steel |
| Alloy/Grade | S235JRH, S275J0H, S355J2H |
| Standard | EN 10219 |
| Standard Length | 6m |
| Minimum Order per Size | 10 t |
| Cut-to-Length Range | 4000 – 12000 mm |
Section Properties
Nominal values calculated from nominal dimensions to EN 10219-2.
| Property | Value |
|---|---|
| Cross-sectional area(A) | 109 cm² |
| Second moment of area(I) | 16223 cm⁴ |
| Radius of gyration(i) | 12.2 cm |
| Elastic section modulus(Wel) | 912 cm³ |
| Plastic section modulus(Wpl) | 1195 cm³ |
| Torsional inertia constant(It) | 32447 cm⁴ |
| Torsional modulus constant(Ct) | 1825 cm³ |
| Surface area per metre(As) | 1.12 m²/m |
| Length per tonne | 11.7 m |
Grade strength and capacity
Minimum strength of each grade this size is rolled in, with the indicative capacity of the section.
| Grade | Min. yield | Tensile | Bending Wel·fy | Axial A·fy |
|---|---|---|---|---|
| S235JRH | 235 MPa | 360–510 MPa | 214 kNm | 2551 kN |
| S275J0H | 275 MPa | 410–560 MPa | 251 kNm | 2986 kN |
| S355J2H | 355 MPa | 470–630 MPa | 324 kNm | 3854 kN |
Ordered in S355J2H, the S235JRH bending capacity of this size is reached with a 8 mm wall in the same outer size (68.6 kg/m, 20% lighter).
Indicative values from nominal dimensions: Wel × fy and A × fy, without buckling, cross-section class or partial safety factors. Not a design check.
Nearest inch size to ASTM A500: HSS 14 × 0.375 →
Similar Sizes
Explore alternative dimensions that might suit your needs