OD 73 × 60.3 Stainless Steel Eccentric Reducer 304
OD 73 × 60.3 eccentric reducer (AISI 304) with one flat side, used on pump suction lines and where the top or bottom of the pipe must stay level.
Add to Quote Request
Select quantity to add to your quote cart
Applications & Usage
Used for diameter transitions on welded pipelines while preserving flow continuity.
Technical Specifications
| Specification | Value |
|---|---|
| Fitting type | Eccentric reducer |
| Large OD | 73 mm |
| Small OD | 60.3 mm |
| Material | AISI 304 |
| Standard | EN 10253 / ASME B16.9 |
Similar Sizes
Explore alternative dimensions that might suit your needs
Technical guides
304 vs 316 stainless steel: composition, strength, corrosion resistance and when to use each
How 304 (1.4301) and 316 (1.4401/1.4404) stainless steel differ in composition, PREN, strength and chloride resistance, what the L grades and A2/A4 fasteners mean, and which grade to choose.
Read the guide →Butt-weld fittings dimensions: elbows, tees, reducers and caps to ASME B16.9 and EN 10253
Centre-to-end dimensions of 90° and 45° elbows, equal tees, reducers and caps to ASME B16.9 for NPS ½" to 24", long and short radius elbows, concentric and eccentric reducers, and how EN 10253 fittings differ.
Read the guide →