Stainless Steel Concentric Reducer 304
AISI 304 concentric reducers keep the pipe centreline aligned when stepping diameter on welded stainless process lines. Used for pump discharges, header transitions, and layout-critical runs where eccentricity is not required. Quoted and sold per piece.
Choose a size below and add it to your quote.
Available Sizes & Finishes
28 sizes available
Filters
Size A (mm)
Size B (mm)
Thickness (mm)
Applications & Selection Guide
Stainless steel concentric reducers in AISI 304 to EN 10253 / ASME B16.9, joining two tube diameters on a shared centreline with plain ends for welding. The symmetric cone maintains even flow distribution through the transition.
Use concentric reducers on vertical stainless lines and pump discharge sides in food, beverage, water treatment, and chemical installations. On horizontal suction lines choose the eccentric version to avoid air entrapment. Large × small OD combinations are listed in the table above; 316L can be offered for chloride service on request.
Quoted and sold per piece. Send both ODs, quantity, and destination in a quote request for exact pricing.
Technical guides
304 vs 316 stainless steel: composition, strength, corrosion resistance and when to use each
How 304 (1.4301) and 316 (1.4401/1.4404) stainless steel differ in composition, PREN, strength and chloride resistance, what the L grades and A2/A4 fasteners mean, and which grade to choose.
Read the guide →Butt-weld fittings dimensions: elbows, tees, reducers and caps to ASME B16.9 and EN 10253
Centre-to-end dimensions of 90° and 45° elbows, equal tees, reducers and caps to ASME B16.9 for NPS ½" to 24", long and short radius elbows, concentric and eccentric reducers, and how EN 10253 fittings differ.
Read the guide →Product Information
Material Grade
AISI 304
Manufacturing Standard
EN 10253 / ASME B16.9
Material Type
Stainless Steel
Category
Concentric Reducer
Ready to request pricing?
Add sizes to your quote cart, or paste your full list — Excel, CSV, or plain text.