Loading...

Прямоугольное полое сечение ERW по EN 10219 в S355J2H. Минимальный предел текучести составляет примерно 355 МПа, поэтому одинаковый внешний размер выдерживает большую нагрузку, чем S235 или S275. Размеры варьируются от 20×20 мм до 500×500 мм. Стандартная длина составляет 6 м. Доступность зависит от размера. Используется для каркасов, колонн, балок кранов и конструкций машин.
Choose a size below and add it to your quote. We typically reply within one business day.
Доступно 126 размеров
S355 square hollow sections are ERW-welded to EN 10219 in S355J2H. Minimum yield is about 355 MPa, so the same outside size carries more load than S235 or S275.
Sizes run from 20×20 mm to 500×500 mm. Straightness, squareness, corner radius, and the internal weld follow the same EN 10219 practice as the S235 square. For general fabrication, S235JR or S275 square box is the other grade on these sizes.
Standard length is 6 m, quoted per length. Availability depends on the size. Include size, quantity, and destination in your quote request; we confirm availability and delivered pricing.
S355J2H (ST52)
EN 10219
Сталь
Профиль квадратный замкнутый S355J2H
Have a longer list or Excel file? Send your list
Add sizes to your quote cart, or paste your full list — Excel, CSV, or plain text.