Loading...
Profil Omega (tip pălărie) profilat la rece conform EN 10162, produs la comandă din bandă pregalvanizată DX51D+Z / S350GD+Z (EN 10346) sau din bandă laminată la rece neacoperită S235JR. Înălțimi de la 40 la 100 mm, grosimi de 1,5–3 mm. Tălpile orientate spre exterior oferă o față de fixare plană și accesibilă pe ambele părți. Debitare la orice lungime între 1 și 15 m. Utilizat ca șină de montaj pentru panouri solare, profil de distanțare și susținere, precum și substructuri pentru transportoare sau utilaje. Lot minim de producție de aprox. 500 kg per dimensiune și acoperire.
10 dimensiuni disponibile
Omega profiles — also called hat or top-hat sections — are cold roll-formed to EN 10162 with a raised crown, sloped webs, and two outward feet. The closed-trapezoid shape is exceptionally stiff in bending for its weight, and the flat feet give a continuous fixing face on both sides, so the profile mounts flush against panels, sheets, or structure with simple screws or bolts. We produce to order from pre-galvanized DX51D+Z275 / S350GD+Z strip (EN 10346) or uncoated S235JR cold-rolled strip.
Omega profiles serve as solar panel mounting rails on trapezoidal and sandwich roofs, furring and levelling profiles behind facade cladding, stiffeners on large sheet-metal panels, conveyor and machine substructures, and vibration-damping rails under floors and decks. Because both feet sit on the support, loads spread evenly and installation is one-sided and fast. Choose height, crown width, and thickness from the table above — variant pages include the dimensioned cross-section drawing and nominal kg/m.
Made to order with cut lengths from 1 to 15 m and a minimum production run of approximately 500 kg per size and coating. Send the sizes, lengths, and quantities in a quote request and we confirm lead time and delivered pricing. Custom crown widths, foot dimensions, perforations, Aluzinc, and pre-painted RAL strip are available on request.
S235JR / S350GD+Z (DX51D)
EN 10162 / EN 10346
Oțel
Profil Omega
