Loading...
Ладно обликуван Омега (капа) профил според EN 10162, се произведува по нарачка од претходно поцинкувана лента DX51D+Z / S350GD+Z (EN 10346) или необложена ладновалана лента S235JR. Висини од 40 до 100 mm, дебелини 1,5–3 mm. Надворешно свртените стапки даваат рамна монтажна површина за лесно прицврстување од двете страни. Сечење на која било должина од 1 до 15 m. Се користи како шини за монтажа на соларни панели, дистантни и носечки профили за фасади, како и потконструкции за транспортери и машини. Минимална производна серија околу 500 kg по димензија и вид на заштита.
10 димензии достапни
Omega profiles — also called hat or top-hat sections — are cold roll-formed to EN 10162 with a raised crown, sloped webs, and two outward feet. The closed-trapezoid shape is exceptionally stiff in bending for its weight, and the flat feet give a continuous fixing face on both sides, so the profile mounts flush against panels, sheets, or structure with simple screws or bolts. We produce to order from pre-galvanized DX51D+Z275 / S350GD+Z strip (EN 10346) or uncoated S235JR cold-rolled strip.
Omega profiles serve as solar panel mounting rails on trapezoidal and sandwich roofs, furring and levelling profiles behind facade cladding, stiffeners on large sheet-metal panels, conveyor and machine substructures, and vibration-damping rails under floors and decks. Because both feet sit on the support, loads spread evenly and installation is one-sided and fast. Choose height, crown width, and thickness from the table above — variant pages include the dimensioned cross-section drawing and nominal kg/m.
Made to order with cut lengths from 1 to 15 m and a minimum production run of approximately 500 kg per size and coating. Send the sizes, lengths, and quantities in a quote request and we confirm lead time and delivered pricing. Custom crown widths, foot dimensions, perforations, Aluzinc, and pre-painted RAL strip are available on request.
S235JR / S350GD+Z (DX51D)
EN 10162 / EN 10346
Челик
Омега профил
