Fabrication/Steel workshop building
Steel workshop building
Workshop and factory halls fabricated as a marked kit — frames, crane runway beams when you need them, purlins, bracing and bolts.
You send the building. We take off the steel.
This is not a catalogue quote. You do not pick HEA, box, or purlin sizes here. You send span, length, height, and loads — or drawings. We calculate the bill of materials and quote fabrication of that kit.
Typical sizes are only a starting grid so you can see area and bays. The price is the steel we take off for your project: frames, purlins, bracing, plates, and bolts, marked for your crew to erect.
Typical hall sizes we quote from
Starting dimensions for a first takeoff — not stock buildings. Any span and length can be sent.
| Span × length × eave | Floor area | Typical bays | Often used as | Start a quote |
|---|---|---|---|---|
| 12 × 24 × 5 m | 288 m² | 4 | Workshop | Design this |
| 15 × 30 × 6 m | 450 m² | 5 | Workshop | Design this |
| 18 × 36 × 6 m | 648 m² | 6 | Warehouse | Design this |
| 20 × 40 × 6 m | 800 m² | 7 | Warehouse | Design this |
| 20 × 50 × 7 m | 1,000 m² | 8 | Warehouse | Design this |
| 25 × 50 × 7 m | 1,250 m² | 8 | Warehouse | Design this |
| 25 × 60 × 8 m | 1,500 m² | 10 | Warehouse | Design this |
| 30 × 60 × 8 m | 1,800 m² | 10 | Warehouse | Design this |
Bay count assumes 6 m spacing for a first look. The quoted frame follows your loads, openings, and drawings.
Included
- Takeoff from your dimensions or submitted drawings, and a clear fabrication scope — not structural design or permit drawings
- Cutting, drilling, and welding to the agreed specification
- Shop primer or the coating stated on the quote
- Piece marking, packing list, and erection drawings
- Bolt and plate sets for the steel kit
- Mill certificates (EN 10204 3.1) on request
Not included
- Site erection and supervision
- Foundations, slabs, and civil works
- Local building permits and design liability in your country
- Site erection cranes, site labour, and installation tools
Steel workshop and factory buildings, quoted from your requirements
A workshop kit is the fabricated steel for a production hall: primary frames, purlins and girts, bracing, plates and bolts. Send span, length, eave height and the snow and wind loads for your site, or a drawing set. We take off the members and quote fabrication of that marked kit.
If the hall needs an overhead crane, give its capacity and span in the request. Crane runway beams and brackets are then part of the takeoff, so frames are sized for them from the start. Door openings, mezzanines and canopies can be added from your drawings.
Fabrication is done at certified partner shops in Turkey; for structures destined for Europe we use EN 1090 shops. The kit ships piece-marked with erection drawings and a packing list. The typical hall sizes are a starting point, not stock buildings.
Questions about this kit
- Can you include crane runway beams?
- Yes. State the crane capacity and span in the request; runway beams and brackets are then taken off and quoted with the frames.
- Do I need a structural design before asking for a price?
- No. Dimensions and loads are enough for a first price range. If you already have drawings or calculations, send them and we quote against them.
- Who erects the building?
- Within Türkiye, erection can be included in the quote. Abroad, the kit is marked for your crew or a local erector; foundations and permits stay with you.
Design the hall
Set the size, see the frame, then send it. Price range in 24 hours. Firm quote in 2–3 business days.
Hall designer
Change the dimensions. The frame updates. No fake instant price — a real fabrication quote follows.
Step 1 of 3