Aluminium L Angle 65mm x 10mm x 1.5mm
Description
The Aluminium L Angle 65mm x 10mm x 1.5mm is a slim and elongated aluminium unequal angle designed for edge protection, panel framing, and architectural trim where one leg must remain discreet. Produced from EN AW-6063 T6 aluminium alloy, this aluminium l profile offers excellent corrosion resistance, smooth surface quality, and good formability for light-duty applications.
Its 65mm longer leg provides extended vertical or horizontal coverage, while the 10mm shorter leg allows for clean, space-saving installation. This l shape aluminium profile is ideal for use in display panels, cabinet structures, signage borders, and decorative edge finishing. It also serves effectively as an aluminium l trim in modern interior and commercial joinery.
Supplied in mill finish as standard. Powder-coated and anodised surface finishes are available on request for enhanced visual performance or environmental resistance.
We supply aluminium l sections in bulk to furniture manufacturers, architectural fabricators, and fit-out contractors.
➤ Minimum order quantity: 500 kg.
➤ Worldwide delivery via road, sea, or air freight.
/fit-in/1200x1200/alternametals/Aluminium-L-Angle-Drawing-GhDx.png)
| Specification | Value |
|---|---|
| Longer Leg (a) | 65 mm |
| Shorter Leg (b) | 10 mm |
| Wall Thickness (s) | 1.5 mm |
| Weight per metre | 0.298 kg |
| Standard Length | 6 metres |
| Finish Options | Mill finish, powder-coated, anodised |
EN AW-6063
Material Specification
| Alloy | AlMgSi0.5 |
| Temper | T6 |
| Specific Weight | 2.71 gr/cm³ |
| Tensile Strength | 215 MPa |
| Yield Strength | 170 MPa |
| Shear Strength | 130 MPa |
| Hardness | 70 HB |
| Elongation | 6% |
| Elasticity Modulus | 6.89 GPa |
| Expansion Coefficient | 23.4 (20–100°C) |
| Coating Thickness | > 60 micron |
| Anodizing Thickness | 10–25 micron |
Chemical Composition
| Element | Range |
|---|---|
| Silicon (Si) | 0.20 – 0.60 |
| Iron (Fe) | max. 0.35 |
| Copper (Cu) | max. 0.10 |
| Manganese (Mn) | max. 0.10 |
| Magnesium (Mg) | 0.45 – 0.90 |
| Zinc (Zn) | max. 0.10 |
| Titanium (Ti) | max. 0.10 |
| Chromium (Cr) | max. 0.10 |
| Other Elements (each) | max. 0.05 |
| Other Elements (total) | max. 0.15 |
/fit-in/600x600/alternametals/Aluminium-Angle-15mm-x-15mm-x-1-3mm-86zD.png)
/fit-in/600x600/alternametals/Aluminium-Angle-15mm-x-15mm-x-1-5mm-Zb8K.png)
/fit-in/600x600/alternametals/Aluminium-Angle-20mm-x-20mm-x-1mm-VrCM.png)
